The 10G-SFPP-TX-A transceiver consumes significantly more power than typical 10G transceivers (TSB 2020-011).

Summary

Guidelines for deploying the 10G-SFPP-TX-A transceiver within the power capabilities of the supported ICX switches.

Question

Why does ICX with 10G-SFPP-TX-A transceiver see system instability and/or reboots?

Customer Environment

PRODUCTS AFFECTED: 10G-SFPP-TX-A, ICX7250-24/24P/48/48P, ICX7550-24/24P/24ZP/24F/48/48P/48ZP/48F, ICX7650-48P/48ZP/48F, ICX7650-4x10GF, ICX7750-48F, ICX7850-48F/48FS Affected Software Versions FI 08.0.90a and above, FI 08.0.95c and above. CORRECTED IN RELEASE: No correction

Root Cause

This 10G-SFPP-TX-A transceiver consumes significantly more power than typical 10G transceivers.

Symptoms

system instability and/or reboots

Troubleshooting Steps

run show media to check for   10G-SFPP-TX-A  and the number of this types of transceivers.

For example: If you are using four 10G-SFPP-TX-A, you must leave four SFP+ ports empty.

Resolution

Please follow the guidelines provided in Table 1 below to avoid a power violation. For each 10G-SFPP-TX-A installed, another SFP+ slot MUST be left empty.
For example: If you are using four 10G-SFPP-TX-A, you must leave four SFP+ ports empty.

Attachment 1

TSB-2020-011-10G-SFPP-TX-A.pdf
application/pdf
Download
(218 KB)

Related Articles

TSB 2020-011

Article Number:
000011205

Updated:
January 31, 2021 12:24 AM (almost 4 years ago)

Answer Attachment 1
TSB-2020-011-10G-SFPP-TX-A.pdf
application/pdf
Download
(218 KB)

Tags:
Configuration, Installation, Ruckus ICX Switches

Votes:
9

This article is:
helpful
not helpful