Technical Documents

ZoneFlex 9.7 (GA) What's New

What's New in ZoneFlex 9.7
Added:
2018-03-06 06:41:08 PM
Availability:
All Users
File Type:
PDF
File Name:
Whats_New_in_ZF_9.7_(GA-Fin...
File Size:
133 KB
MD5 Checksum:

Applicable To The Following Products

FlexMaster

The Ruckus FlexMaster (FM) Management System is a fully-featured, intuitive, and complete, Linux-based managed service platform for configuration, fault detection, audit, performance management and optimization of hundreds of thousands of remote Smart Wi-Fi APs or Smart Wireless LANs (WLANs) from a single point. It provides a unique collection of automated and customized facilities not found in other management platforms such as an automated and customized super dashboard, trending reports and customized graphs, detailed client data for planning and troubleshooting and comprehensive events management.

Ruckus 2741

Ruckus 802.11g Outdoor Access Point.

Ruckus 7025

Multiservice 802.11n Wired/Wireless Wall Switch

Ruckus 7055

Multiservice 802.11n dual band concurrent 2 stream Wired/Wireless wall switch The Ruckus 7055 is the industry’s first dual-band dual-concurrent wall mounted wired switch and wireless wall switch designed for next generation wireless. The Ruckus 7055 features integrated 2.4GHz and 5GHZ concurrent 802.11n WLAN radios, five wired Ethernet ports, PoE ouput, and a passthrough port for devices such as digital phones that require native access to a PBX system. Designed with hotels and multi-dwelling units in mind, the Ruckus 7055 is easy to mount to an electrical junction box and has a sleek and low-profile form factor.

Ruckus 7321

Best Price PerformanceDual-Band 802.11n Access Point

Ruckus 7321-U

Indoor 802.11bg AP

Ruckus 7341

7341 Single-band (2.4GHz) 11n AP

Ruckus 7343

7343 Single-band (2.4GHz) 11n AP

Recommended Firmware:
ZF7343 Firmware 9.6.2.0.13
Ruckus 7352

The Ruckus 7352 is amid-range 802.11n 2x2:2 2.4GHz (single-band) access point, capable ofdelivering up to 300 Mbps of physical layer performance.  The Ruckus 7352 is optimized for high client density enterprise and hotspot environments where 5 GHz mesh or access is not required.  It may be powered by 802.3af PoE or accessory power adapter, is physically discrete and unobtrusive due to its small size and minimalist industrial design, and can be mounted to hard walls or ceilings and acoustical drop ceilings.  

Ruckus 7363

7363 Dual-band 11n AP

Ruckus 7372

The next generation Ruckus 7372 mid-range 802.11n 2x2:2 dual-band 2.4GHz and 5GHz concurrent access points are designed for high density mobile device environments with bandwidth hungry and latency sensitive applications such as Voice and Video over Wi-Fi

Ruckus 7441

The ZF7441
is a purpose built AP designed to enable Wi-Fi services onto in-building
wireless coax systems, commonly called DAS or Distributed Antenna
Systems. 



Ruckus 7761-CM

The first high performance strand-mounted 802.11n Smart Wi-Fi access point with cable modem.

For actual Cable Modem firmware, Access it here

Ruckus 7762

Ruckus Dual Band 802.11n Outdoor Access Point

Ruckus 7762-AC

Ruckus Dual Band 802.11n Outdoor Access Point

Ruckus 7762-S

Ruckus Dual Band 11n Sector Outdoor Access Point

Ruckus 7762-S-AC

Ruckus 7762-S-AC Dual-band 802.11n Outdoor Access Point with Sector Antenna

Ruckus 7762-T

Ruckus 7762-T Dual-band 802.11n Outdoor Access Point with Omni Antenna

Ruckus 7781-CM

Ruckus 7781-CM Dual Band 802.11n Outdoor Access Point with DOCSIS 3.0 Cable Modem.

For actual Cable Modem firmware, Access it here

Ruckus 7782

  • Carrier-class 2.4/5GHz 802.11n Access Point with an integrated 30º narrow beam antenna for unprecedented performance in high-density applications

Ruckus 7962

Ruckus 7962 2.4Ghz and 5Ghz Dual Band Access Point

Ruckus 7982

The Industry's Highest Capacity, Highest Performing Three-stream Ruckus 7982 802.11n Smart Wi-Fi Access Point for Carriers and Enterprises

Recommended Firmware:
ZF7982 Firmware 9.6.1.0.15
SmartCell 8800 Outdoor AP

The Ruckus SmartCell 8800 Series represents a completely new class of outdoor access point (AP) technology designed specifically to address the capacity and siting challenges mobile operators face in deploying HetNets in dense urban environments. 

ZoneDirector 1100

ZoneDirector 1100 Product Family

NOTE: ZoneDirector software upgrade is available only to the Premium Support or Software Upgrade Support customers with valid login credentials. If you are a Premium Support or Software Upgrade Support Customer, you can create a login credential Here.

Please read the Release Notes before deploying any new ZoneDirector software.

Customers with 7962/7762/7025 model AP recommended release is 9.8.3.0.58, found Here.

ZoneDirector 3000

ZoneDirector 3000 Product Family

NOTE: ZoneDirector software upgrade is available only to the Premium Support or Software Upgrade Support customers with valid login credentials. If you are a Premium Support or Software Upgrade Support Customer, you can create a login credential Here.

Please read the Release Notes before deploying any new ZoneDirector software to be sure your current AP models are all supported.

Customers with 7962/7762/7025 model AP recommended release is 9.8.3.0.58, found Here.

ZoneDirector 5000

ZoneDirector 5000 Product Family

NOTE: ZoneDirector software upgrade is available only to the Premium Support or Software Upgrade Support customers with valid login credentials. If you are a Premium Support or Software Upgrade Support Customer, you can create a login credential Here.

Please read the Release Notes before deploying any new ZoneDirector software.

Customers with 7962/7762/7025 model AP recommended release is 9.8.3.0.58, found Here.

Working...Please wait

This is here to prevent you from accidentally submitting twice.

The page will automatically refresh.