Ruckus Optics Tranceivers

Image 1

End of Life

Product Detail

Ruckus Optics Transceivers deliver Ethernet connectivity with guaranteed compatibility with Ruckus switches, full compliance with industry standards, and lifetime support, while satisfying a wide range of speed and distance requirements. The Ruckus Ethernet optics family include a wide rande of offerings designed to meed performance and scalability requirements of service providers, enterprise and small and medium business environments.

Model Name:: Optics
Product Family:: EOL RUCKUS Products
Recommended Software:

Documents

Name	File Type	Last Updated
EOS Announcement E1MG-CWD80 and E1MG-100FX-LR-OM	PDF	2018-09-26
EOS Announcement E1MG-LHA-OM and E100G-QSFP28-LR4-10KM	PDF	2019-08-22
Enterprise Network Support Coverage	PDF	2025-01-15
End of Sale Pre-Announcement for 40G Breakout and 40G ESR...	PDF	2020-12-10
End of Sale for 902-0190-0000	PDF	2021-07-02
End of Sale Announcement for RUCKUS RUCKUS E40G-QSFP-LR4-A	PDF	2024-11-15

Downloads

KB Articles

Forum Topics

R710 Transfer Speed

I am connected to R710 and my adapter properties says i got 866 Mbps at 2.4 GHz, however when I test a file transfer I only got about 15 MB/s max... compared to another AP from other... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Maxumum transmission range for Ruckus T710 outdoor AP

I would like to know the maximum distance a Rackus t710 outdoor AP can transmit and have devices like phones connectedand running properly in a clear line of site environment

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus R500 Wireless Transmit Power Settings

HiI have Ruckus R500 AP and where i can find Wireless radio settings to configure transmit power. I have this AP at home so i don't need hi power at home.... (continued)

View Discussion

Updated: 2019-05-24 (almost 6 years ago)

iPhone 7 stops transmitting

I am having issues with the iPhone 7 and 7+. I believe the issue is entirely client side, but I'm still the one needing to fix it. We have an 802.1x certifcate based  SSID,... (continued)

View Discussion

Updated: 2018-10-18 (over 6 years ago)

SKU DE RUCKUS

Hello a question that I hope you can solve, with the Ruckus brand team I can achieve the following, I need 500 access points for p-m-p links with a transfer capacity of 200 mbps. 2x2... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Zoneplanner transmit power levels

HI there,
I am doing my first zone planner job and need to adjust my transmit power levels to the correct level.
I have found this document that tells me the levels to set, but the... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Zonedirector + transmit power settings

Hi,Can somebody explain to me how the transmit power settings are calculated on a ZD?For instance, lets say I have a 7372 currently set to 1/4 power on 2.4ghz.Is that 1/4 power of the... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

802.11v BSS Transition Management check

Hi I am trying to see if 802.11v is enabled CLI command rkscli: get bss-trans-mgmt wlan1 when I enter this I getBSS Transition Management:enabledOKrkscli: get station wlan32... (continued)

View Discussion

Updated: 2020-01-21 (over 5 years ago)

Ruckus AP earthing

I’m Looking for guidance from Ruckus on earthing of their Acccess points, Indoor and outdoor. I’m trying to find out what ruckus have designed the earthing terminals for on there... (continued)

View Discussion

Updated: 2020-09-17 (over 4 years ago)

Not transmitting the "configure.me-xxxxxx" network.

Hi I'm installing 3 x Ruckus H510 unleashed. First one setup nicely as hopefully the Master & working fine. I have a problem with setting up the 2nd H510 as when I plug the LAN... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Transfer AP License from ZD1105(A) to ZD1105(B)

Hello,I have ZD1105(A) with 30AP License and ZD1105(B) with 30AP License, is there any procedure to transfer all Licenses from ZD1105(A) to ZD1105(B) to make ZD1105(B) has 60AP... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

vSZ-H, how to set the transmission speed for 2,4?

Hi everyone!We build a wireless network for entertainment park. They use wireless Intercard debit card readers.setting the wireless network manual for these reader says... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

ICX series Switches are suporting PAT(Port address translate) or NAT(Network Address Translate) ?

I can't find this contents in datasheet & Ruckus FastIron Administration Guide, Does ICX7450 switch require a lincense to use NAT funtion ? 

View Discussion

Updated: 2018-07-24 (over 6 years ago)

Does the ICX7850 switching platform or the ICX platorm in general support a 10GB baste SFP+ transceiver for copper connectivity?

ICX platform and 10GB base T transceiver

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Powering up Ruckus T750

Dears,Regarding powering Ruckus T750, could any one explain to me the difference between,Poe 802.3bt class 7 and AC Power ?what is SFP+ and Ethernet Backhual ?Image... (continued)

View Discussion

Updated: 2020-11-16 (over 4 years ago)

Ruckus Power Settings

Trying to work in Ekahau and figure this out. So if I set an AP power to 4dBm or 3dBm in Rukus what would that equate to?Am I taking the full power value of the band for instance 20dB... (continued)

View Discussion

Updated: 2020-01-27 (about 5 years ago)

Studying RUCKUS Offline

Hi,
I am Ben from Kenya. My company will soon be required to deploy and support RUCKUS equipment for our major Partner who is rolling out WiFi Solutions based on the RUCKUS platform.... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus R510 Slowness

Ruckus R510 Slowness - My topology Comcast Xfinity X1 router with 1Gbps service, measuring 850Mbps as the output. This goes to a Rucker switch C12P, and the output there is 825Mbps. ... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Ruckus Unleashed 200.5 has bug

After testing the 200.5 version of the defective R500 R600, will lead to a series of models, wireless LAN appears high delay, packet loss and other cases, only by reducing version to... (continued)

View Discussion

Updated: 2018-10-18 (over 6 years ago)

Determining AP Transmit Power Settings in ZonePlanner?

Hi, I am still fairly new to ZonePlanner and am trying to determine what the correct transmit power settings should be for various APs. I can find the RF Power Output on the spec sheets... (continued)

View Discussion

Updated: 2018-09-21 (over 6 years ago)

Do Ruckus switch required any specification or special type of media converter?

My customer using ICX7150-24P as Access switch and core switch, the connection between Core and access switch are fiber optic and UTP cable as the uplink. In between fiber and UTP... (continued)

View Discussion

Updated: 2018-11-02 (over 6 years ago)

cisco gbics in brocade/ruckus

Are Cisco gbics compatible with brocade ICX6450-48p switches.  It seems to work because I tested it but I was just looking for confirmation on compatibility.  Thank you.

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Ruckus VF2825 Firmware problem

Hello, I was checking this link:
https://forums.ruckuswireless.com/ruc...
and trying to upgrade the firmware (4.2.0.0.7), however, the upgrade
wasn't smooth (I waited like 5 mins but... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus Unleashed and vrrp setup

Hi! I have follow setup in my country house:1) Fiber internet coming to garage2) Backup LTE Huawei modem on my bedroom.I have first mikrotik on Fiber enter, and second with LTE... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Ruckus 7363 proper setup for 230 users

HelloI borrowed a 7363 AP for an event that will have 230-ish users connected at the same time. Internet will come from a 200 Mbit Zhone ONT with DHCP.Since the 7363 was used, first I... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus guest access redirect problem

Hi all,
I am facing a problem when setup guest access with no authentification and without ssl cert installed. In URL redirect, I am using redirect to the following URL :... (continued)

View Discussion

Updated: 2018-11-27 (over 6 years ago)

state set to mesh learning ruckus

User activity in ZD always repeated "state set to mesh learning ruckus" on same access point. (please see attached)please explain me why that log repeated for same AP?Thank You

View Discussion

Updated: 2017-09-27 (over 7 years ago)

600 users....how much ruckus do i need?

So we are a hotel and conference center. we purchased 2 r500 unleashed, which we are running standalone. One of the devices is in a ballroom approx 45ft by 15 ft. We have a conference... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus IOT (vRIoT) with ZoneDirector?

Hi,I recently obtained a couple of Ruckus AP and a ZD1200 for my home network.Now
I am looking into SmartHome and wondered whether there is a way to
utilize my Ruckus deployment... (continued)

View Discussion

Updated: 2020-09-23 (over 4 years ago)

how to setup two ruckus controller

how to setup two ruckus controller with different number of license in one switch? I have ZD1200 (10) not configure yet. and ZD1100 (50) DHCP all AP's are in POE. What I need is to use... (continued)

View Discussion

Updated: 2018-03-15 (about 7 years ago)

Ruckuss p300 performance problem

HelloDistance between buildings 100 meters.I positioned the ruckus antenna on the roofs.Data migration  is very slow From non root antenna to root antenna .From root to non root... (continued)

View Discussion

Updated: 2020-11-16 (over 4 years ago)

MC55 with AP RUCKUS 7341 problems

Hello.
Excuse my english, i'm a french customer.
I have a big problem with my WiFi Ruckus network for my warehouse.
I've put 12 Ruckus 7341, and i have a fibre connexion with my... (continued)

View Discussion

Updated: 2018-09-21 (over 6 years ago)

Unable to boot image to Ruckus ICX 7150

Hi Everyone, Please help me about booting image from USB or TFTP server to Ruckus ICX 7150. This issue arised when I deleted flash of both primary and secondary with reload  while... (continued)

View Discussion

Updated: 2018-07-06 (almost 7 years ago)

Ruckus no longer broadcasting wifi

I have a new Lennar home with a Ruckus switch icx 7150-c12p, which is then hardwired to 2 different R510 APs. My ISP is Spectrum and I am using the Spectrum router. Our neighborhood had... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Radio stops transmitting

I have an Zonedirector 1000 along with some 7942 APs.
We have noticed some issues where the radio in the AP simply dies.
It stops transmitting (it is online in the zonedirector) but... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Can Ruckus ICX 7150-C12P act as a router and do NAT?

I have a new Ruckus ICX 7150-C12P switch. I’m wondering if I can connect it directly to my ISP’s modem and let it act both as a DHCP server for my devices inside my home and also do the... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Purchase Ruckus zonedirector second hand

I have basically 2 questions regarding purchasing a second hand zonedirector (1200).- Can the hardware be registered to myself, instead of the original  buyer? (I know I can... (continued)

View Discussion

Updated: 2020-09-10 (over 4 years ago)

Ruckus 7372 standalone with multiple SSID and VLANs

Hi,
Can a standalone Ruckus 7372 have two or more ssid's on different vlans? I would like Eth1 to be a trunk and have the two vlans bridged to my LAN where they will share a dhcp... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

New to Ruckus - Extending a WiFi Signal to an Outbuilding

Hello all, I'm not very familiar with Ruckus products. I'm hoping someone can point in the right direction with the products I might need for this...- Customer already has an... (continued)

View Discussion

Updated: 2019-01-29 (about 6 years ago)

ruckus wireless freezes some android phone

I have very interesting problem. I am using ZD1106 with the firmware 9.8.2.0 build 15 with 4 piece 7982 AP. Some phones, for example, samsung j2 (happened today) freezes when the access... (continued)

View Discussion

Updated: 2019-09-05 (over 5 years ago)

Ruckus 7982 issues on Cisco 3750PoE Switches

I have a Cisco 3750PoE-48 network at all of my stores. Sometimes a ZF7982 will stop communicating with my ZD3000 causing service outages at that location. I have found only 2 things... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus ZD 3000 working on Centralized Architechture

HiWe have a ZD 3000 controller on premise, since our branches have expanded we want to add access points in the branches and manage from a central location.Can someone advice if this... (continued)

View Discussion

Updated: 2017-10-11 (over 7 years ago)

Ruckus IoT controller DHCP Option Question

So I understand how the Option 43 works well for the VSZ and ZD.  However for the IoT controller documentation seems to be a bit confusing.  It says that the IoT controller... (continued)

View Discussion

Updated: 2019-11-13 (over 5 years ago)

Standalone Ruckus 7982 Connectivity Issues

For home use I have a single Ruckus 7982 AP running in standalone mode on firmware 100.1.0.0.194.  I also have a single Meraki MR18 AP.  Connectivity to the Meraki is... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus Unleashed - invalid password apple devices

Good Morning,I have a ruckus R500 unleashed system with 6 connected ap. The firmware is 200.0.9.9.608. The problem is with some apple devices (ipad and macbook for now). After that the... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

MAC address authentication on Ruckus Smartzone-E 3.6

I am looking a solution as MAC address authentication on Ruckus Smartzone-E  3.6 with Radius server. Is it possible Version 3.6? Regards,Deepak Kumar

View Discussion

Updated: 2020-09-10 (over 4 years ago)

How can Ruckus R710 Deliver 800 Mbps on 2.4 Ghz ?

I have Ruckus R710 deployed in Office environment, Ruckus R710 is configured on Static Channel on 2.4 Ghz.I connect 1 Laptop with R710 my Laptop gets associated on 144 Mbps speed and... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Ruckus VSZ-E API have some example or suggest?

I want to make a program use Ruckus VSZ-E API on controller that can auto change guest-ssid password.Have some example or suggest?

View Discussion

Updated: 2019-06-10 (almost 6 years ago)

How to integrate between Ruckus and Palo Alto

Hi everyone,
I have some problem about how to integrate between Ruckus and Palo Alto.
The Palo Alto need the Ruckus syslog message which contain the IP and username for creating the... (continued)

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Microsoft Surface, just not compatible with Ruckus?

Seeing this at three different locations - customers show up with an MS Surface device and they simply cannot log in. No interesting logs in the ZD, I'll see one log of "too many... (continued)

View Discussion

Updated: 2019-12-05 (over 5 years ago)

Ruckus r600

I have a r600 ruckus access point and I would like to know how I can use my second ruckus without cable only with the POE?

View Discussion

Updated: 2017-09-27 (over 7 years ago)

Security Bulletins

Support Bulletins

Advanced Search

Ruckus Optics Tranceivers

Product Detail

Technical Support Bulletins

Image 1

Working...Please wait

Alert!!