Configure WLAN Groups on ZD
Summary
WLAN Groups can control what SSIDs are serviced by what APs.Question
How can I restrict which AP's broadcast specific SSIDs?Customer Environment
ZoneDirector managed wireless networkRoot Cause
You can't assign more than 27 SSIDs to any WLAN group.Resolution
To restrict broadcasting of WLANs on specific APs we can use the WLAN groups.1. Create WLAN group Under Configure > WLANs - WLAN Groups
2. Enter a name and select the WLANs that are required to be broadcast (if you do not need them to broadcast uncheck them) and click OK. Please note that you can only check max of 27 SSIDs under each WLAN group.
3. Go to Configure > Access Points. Edit the required AP using its MAC address.
4. Look for WLAN Group with the drop-down and you can select the WLAN group you had created and click Ok
5. If you want to assign this WLAN group to a specific AP group, you have to edit the AP group instead.
The Number of WLAN groups that can be created depends on the ZoneDirector Model.
ZoneDirector Model |
Max WLAN Groups |
ZoneDirector 1100 |
128 |
ZoneDirector 3000 |
1024 |
ZoneDirector 5000 |
2048 |
Article Number:
000001983
Updated:
August 18, 2020 06:57 AM (about 4 years ago)
Tags:
Configuration, Troubleshooting, ZoneDirector
Votes:
2
This article is:
helpful
not helpful