Ruckus P300

LACP link aggregation on P300 Bridge AP

P300 supports LACP after disabling 1) Mesh gateway detection
2) loop detection features

Wireless P300 support for 4900 MHz to 5150 MHz

There is no support for 4900 MHz to 5150 MHz, 4.9 GHz - 5.15 GHz in Ruckus products at this time.

False Water Ingress for T300, T301, P300

Water can get held inside T300 external shell, outside it's internal water tight gasket. Water can be seen leaking and appears to be a faulty seal - however this is normal behaviour... (continued)

FAQ: What should I know about the P300 802.11ac outdoor PtMtP Bridges?

FAQ: Many new features and capabilities are built into the P300 802.11ac PtMtP Bridges.

How to manually configure P300 Bridge Distance value

It's critical to specify accurate Distance (in Meters) between P300 Root Bridge and Non-Root Bridges.
This is the AP CLI command if unable to access WebUI.

P300 not passing VTP between Cisco VLAN Trunk Protocol enabled switches

Version 100.1.0.9.46 appears to have problem passing VTP between Cisco switches on both sides, fixed with a bug patch.

Why Speedflex is not working on P300 post upgrading to 100.1.0.9.108 and higher versions

Article explains why Speedflex may not work after upgrading the P300 to 100.1.0.9.108 and higher versions

Ruckus Planner - Floor Plans in PDF format

Please I need a confirmation if Ruckus Zone Planner supports floor plans in PDF format? I can't import PDF files.
Maybe I need to do an upgrade to be able to use PDF files. Please help.

Ruckus ICX 7650 PREM License

Ruckus ICX 7650 uses Self-Authenticated Upgrade (SAU) feature to enable license features.

P300 Not connecting to Root bridge.

New P300 wireless bridge not able to connect to Root bridge.

Ruckus APs do not support Passive PoE

Ruckus AP's and Passive PoE

ICX-7250-24P Providing PoE to an AP Ruckus R610

ICX-7250-24P Config necessary for providing PoE to Ruckus R610 on all ports.

How to become Ruckus Channel Partner/VAR

Article has got information about submitting an application to become Ruckus partner

Ruckus WDS with third party wireless bridge

Can any third party wireless bridges be used with Ruckus? Maybe, under certain conditions.

P300 AP's fail to establish Point-to-Point Link.

P300 AP's fail to establish Point-to-Point Link

How to reset password for Ruckus Partners Portal

Follow this article to reset your Ruckus Partners Portal login password

vSmartZone to RUCKUS One (Formerly RUCKUS Cloud) migration process

This article explains v/SmartZone controller managed Access points and Switches to RUCKUS One (Formerly RUCKUS Cloud) migration procedure.

ZoneDirector to RUCKUS One (Formerly RUCKUS Cloud) migration process

This article explains ZoneDirector controller managed Access Point to RUCKUS One (Formerly RUCKUS Cloud) migration procedure.

How to migrate Access Point(AP) from RUCKUS One(R1) to RUCKUS SmartZone(SZ)

This guide provides a step-by-step process to migrate an AP from R1 to SZ. The process involves factory resetting the AP, upgrading it to a solo image, and then joining it to vSZ/SZ.

RUCKUS One & RUCKUS AI activation with 180 Day Grace Activation Period

Information on Ruckus Security policies

Where can customers find information on Ruckus Security policies and Vulnerability reporting?

Enabling WMM and power save on Ruckus

Do Ruckus APs interfere with a Pacemaker?

Ruckus APs have IEC/EN 60601-1-2 certification that our APs do NOT interfere with Pacemakers.

Ruckus H510 in SZ 5.1 - Enabling the Wired Ports

How-to guide on enabling the 4 LAN ports on an H510 migrated from 5.1 to 5.2 Zone/AP Group

Packet Captures through Ruckus APs

Describes the configuration necessary to use a Ruckus AP to gather wireless traces.

Ruckus-One Compatible Access points

How to link access points with RUCKUS-AI (formerly known as RUCKUS Analytics) AP license pool?

This article explains how to link APs with RUCKUS-AI AP license pool.

P300 bridges are not establishing a connection

Non-Root bridge will drop wireless if it sees an alternative (ie Wired) path to default GW.

How to set a fixed channel on the P300 bridge AP?

How to set manual a fixed channel on the P300 bridge AP

Is Spanning Tree Protocol (STP) supported by Ruckus Access Ponts?

STP is required by most of network devices to detect and prevent network loops.

P300 Unstable link at close range

Too much receive power can leave PTP P300 unable to get link stable at very close range.

RUCKUS AI (formerly known as RUCKUS Analytics) Temp License & On-boarding

This article explains the process of how to install RUCKUS AI to troubleshoot any issues on the SmartZone Controller

What does the Ruckus Customer Support portal provide?

This article describes the main features of the Ruckus Customer portal as a comprehensive support tool that gives the customer a single destination to address their support needs.

How to see or edit AP properties - Ruckus Wireless Airmagnet planner

How to see or edit AP properties - Ruckus Wireless Airmagnet planner

How can a Ruckus Partner/VAR access Training Portal/Commscope University

How-can-a-Ruckus-Partner-VAR-access-Training-Portal-Commscope-University

How can a Ruckus Partner access Support portal?

Article has got information about Partner accessing Support portal from the Partners portal

Checklist to Band 48 phone prerequisites for connecting to Ruckus AP/CBSD

Though a phone is listed as Band 48 supported, not all models of that phone will work in the B48. This note is a checklist of items that need to be checked before a phone can connect... (continued)

Purchased Cloud Subscriptions not showing in RUCKUS One Cloud Portal

Article describes about the steps which are to be performed when the licenses are not available on the Ruckus Cloud UI

VLAN port assignment through Switch configuration profile in RUCKUS One

This article summarizes on how switch configuration profile works in RUCKUS One.

Ruckus Unleashed to Ruckus One Migration

CONVERT YOUR EXISTING UNLEASHED APs FOR RUCKUS-ONE CLOUD

Cipher Suites supported by Ruckus ZoneDirector

ZoneDirector now supports more than just TLS 1.0 Cipher Suites

Does Ruckus support channel 144 in the 5GHz band?

Ruckus products do not support channel 144 in the 5GHz band.

How to access Ruckus Knowledge Base Articles ?

Basic guidelines for accessing and using Ruckus Knowledge Base content via the Support Portal

How does Ruckus work with Barracuda firewall

Ruckus provides syslog to Barracuda, filtering username/IP address, to apply ACL policies

Can VLAN 1 be tagged on Ruckus devices?

This article describes the process of tagging VLAN 1 on Ruckus devices

Disable TLSv1.0 on Ruckus AP managed by v/SZ

Some APs on the Network are working on TLSv1.0 and customer wants to disable it and use TLSV1.1 or TLSV1.2

Ruckus Bonjour Gateway Deployment Guide

How to configure and troubleshoot Ruckus Bonjour Gateway in ZD and vSZ/SZ-100/SCG

Brownfield switch configuration in Ruckus Cloud

Feature to add production switch to the Rucks Cloud without loosing its existing configuration

Prevent ports assigned to Ruckus APs from being utilized by other devices

This article explains security mechanisms which may be implemented to prevent ethernet ports assigned to access points being used by other devices.

How to troubleshoot Wi-Fi client connectivity with RUCKUS Access Points - WPA2 and WPA3 Personal

Document provides a comprehensive guide for the troubleshooting of Wi-Fi client connection with RUCKUS Access Points (AP) WLAN type WPA2 and WPA3 Personal, for different RUCKUS Wireless... (continued)

Captive Portal / WISPR does not work properly when using On Prem Cloudpath and RuckusOne

When customer uses RuckusOne and On Prem flavor of Ruckus Cloudpath, the WISPR / Captive Portal authentication flow fails with error code "An error has occurred" with... (continued)