How to configure POE operation mode for AP's from SZ/vSZ CLI

Summary

This article explains steps on how to configure POE operation mode for AP's from SZ/vSZ CLI

Question

How to configure POE operation mode for AP's from SZ/vSZ CLI?

Customer Environment

SZ,vSZ,AP's

Resolution

SZ/vSZ allows us to configure model specific POE operation mode. This configuration is applied to all AP's of selected model within that zone.

Steps:
Login SZ CLI and configure poe-operating-mode using following steps:

SZ(config)# domain <domain name>
SZ(config-domain)# zone <zone name>
SZ(config-domain-zone)# ap-model <Type AP Model name>
SZ(config-domain-zone-ap-model)# poe-operating-mode <mode>
802.3af      802.3af
802.3at      802.3at
802.3at+     802.3at+
auto         auto
<mode>       PoE mode
SZ(config-domain-zone-ap-model)# poe-operating-mode 802.3at

For vSZ, use below steps:
vSZE(config)# zone "Default Zone"
vSZE(config-zone)# ap-model R720
vSZE(config-zone-ap-model)# poe-operating-mode
802.3af      802.3af
802.3at      802.3at
802.3at+     802.3at+
auto         auto
<mode>       PoE mode
vSZE(config-zone-ap-model)# poe-operating-mode 802.3at

Article Number:
000007588

Updated:
January 24, 2018 09:46 AM (almost 7 years ago)

Tags:
Configuration, ZoneFlex Indoor, virtual SmartCell Gateway, SZ100

Votes:
1

This article is:
helpful
not helpful