Guest Access WLAN Without Authentication in SZ
Summary
This article explains the configuration steps for setting up a Guest WLAN with no authentication.Question
How to configure/create a Guest WLAN with no authenticationCustomer Environment
SZ based networkResolution
1. Create a new WLAN from Wireless LANs
2. Fill in the profile details, and add the WLAN Groups as needed
3. From the Authentication Options, choose Guest Access
4. If you would like to use encryption with a pre-shared key, select wpa2 under Encryption Options and fill in the passphrase as required
5. Under the section "Guest Access Portal", create a new profile by clicking on '+' sign
6. Fill in the profile details, and make sure to turn on "Terms and Conditions", and fill in the box with the same >> Click OK
7. From the drop down box against "Guest Authentication", choose "Always Accept"
8. Click OK
Article Number:
000011253
Updated:
January 20, 2026 12:48 PM (2 months ago)
Tags:
Configuration, SmartCell Gateway
Votes:
0
This article is:
helpful
not helpful