How to add additional SSH port in RUCKUS SmartZone(SZ)

Summary

Article talks about how to configure an additional port for SSH access, while default port remains 22 for SZ and AP/Switch/Dataplane communication.

Question

Can we change the SSH default port on the SZ controller, or add additional port?

Customer Environment

SZ-100, SZ-124, SZ-144, vSZ

Resolution

Important note: An additional SSH port can be configured for SmartZone's CLI access but default port will always remain 22 which will be utilized by the APs and other devices to communicate with the controller.

Supported version: SmartZone 6.1.X and later.

Procedure

Log into the SZ/vSZ as the admin user to the CLI via SSH:

Welcome to the Ruckus SmartZone 100 Command Line Interface
Version: 6.1.2.0.354
SZ100-45> enable
Password: ********
SZ100-45#
SZ100-45# debug
SZ100-45(debug)#
SZ100-45(debug)# debug-tools
[Change to system]
Welcome to Debug CLI Framework!
(debug tool-set) system $
(debug tool-set) system $ use sz
[Change to sz]
(debug tool-set) sz $
(debug tool-set) sz $ manage-alias-ssh-port
1.) Set alias SSH port
2.) Get alias SSH port
3.) Delete alias SSH port


Select Option (1/2/3): <Enter the number as per requirement>

1.) To Set SSH port

(debug tool-set) sz $ manage-alias-ssh-port
1.) Set alias SSH port
2.) Get alias SSH port
3.) Delete alias SSH port
Select Option (1/2/3): 1

Enter the port number: 3333
Done
[Execution Done!]


2.) To view the SSH port

(debug tool-set) sz $
(debug tool-set) sz $ manage-alias-ssh-port

1.) Set alias SSH port
2.) Get alias SSH port
3.) Delete alias SSH port
Select Option (1/2/3): 2
3333
[Execution Done!]


3.) To delete the SSH port

(debug tool-set) sz $ manage-alias-ssh-port

1.) Set alias SSH port
2.) Get alias SSH port
3.) Delete alias SSH port
Select Option (1/2/3): 3
Done
[Execution Done!]
(debug tool-set) sz $


Access Points cannot communicate with the alias SSH port, and used only to access CLI of the controller.

Article Number:
000014318

Updated:
May 21, 2024 03:51 PM (6 months ago)

Tags:
Configuration, System Network Management, SZ144, SZ300, virtual SmartCell Gateway, SZ100

Votes:
0

This article is:
helpful
not helpful

Working...Please wait

This is here to prevent you from accidentally submitting twice.

The page will automatically refresh.

Alert!!

Close