Geo-Redundancy Licensing Concept
Summary
Article has got information about Geo-redundancy licenses and the way they workQuestion
Geo-Redundancy Licensing ConceptCustomer Environment
SZ-300 and vSZ-H running above 3.6 versionResolution
Geo-Redundancy (HA) licenses are available from 3.6 on SZ platform and are to be applied only on the standby cluster controller to enable the redundancy between the active and Standby cluster controllers. The license SKU for HA license is L09-0001-SGHA and is granular to a single AP license.How it works:
-
Activation of HA licenses remains the same as virtual AP license activation
Refer to article https://support.ruckuswireless.com/articles/000003436 to know how the activation works -
Unlike any other AP licenses, HA licenses do not show up on the controller web UI even after associating them to a specific SN via LiMAN. They are available only after configuring geo-redundancy and performing sync
-
HA licenses would only function on the standby cluster, hence they should be added on the standby controllers only
-
For SZ 6.0. the Switch license SKU: L09-0CX1-SGHA, is available
CAPACITY-SWITCH-HA: Switch Capacity License on Standby cluster only.
Article Number:
000008655
Updated:
October 01, 2024 11:03 AM (2 months ago)
Tags:
System Network Management, Support License Activation, Registration, virtual SmartCell Gateway
Votes:
0
This article is:
helpful
not helpful