Ruckus Indoor AP 106.0 User Guide
Applicable To The Following Products
Multiservice 802.11n dual band concurrent 2 stream Wired/Wireless wall switch The Ruckus 7055 is the industry’s first dual-band dual-concurrent wall mounted wired switch and wireless wall switch designed for next generation wireless. The Ruckus 7055 features integrated 2.4GHz and 5GHZ concurrent 802.11n WLAN radios, five wired Ethernet ports, PoE ouput, and a passthrough port for devices such as digital phones that require native access to a PBX system. Designed with hotels and multi-dwelling units in mind, the Ruckus 7055 is easy to mount to an electrical junction box and has a sleek and low-profile form factor.
The Ruckus 7352 is amid-range 802.11n 2x2:2 2.4GHz (single-band) access point, capable ofdelivering up to 300 Mbps of physical layer performance. The Ruckus 7352 is optimized for high client density enterprise and hotspot environments where 5 GHz mesh or access is not required. It may be powered by 802.3af PoE or accessory power adapter, is physically discrete and unobtrusive due to its small size and minimalist industrial design, and can be mounted to hard walls or ceilings and acoustical drop ceilings.
The next generation Ruckus 7372 mid-range 802.11n 2x2:2 dual-band 2.4GHz and 5GHz concurrent access points are designed for high density mobile device environments with bandwidth hungry and latency sensitive applications such as Voice and Video over Wi-Fi
ZoneFlex C110 Wave2 802.11ac (MU-Mimo) Wi-Fi AP with DOCSIS 3.0 backhaul support.
The ZoneFlex C110 is a Wave 2 802.11ac (MU-MIMO capable) Wi-Fi Access Point with support for DOCSIS 3.0 backhaul. The C110 comes in a convenient wall-plate form factor for easy installs.
C110 features Ruckus' patented BeamFlex+ adaptive antenna technology to deliver high-speed 802.11ac Wi-Fi in a low-profile design that can be discretely installed over a standard electrical junction box. C110, with a DOCSIS 3.0 backhaul, allows a range of wired and wireless services to be delivered in hotel guest rooms, student residences, and multi-dwelling units over existing coaxial cabling and, therefore, minimal additional capital expenditure.
C110 has an Ethernet switch with two 10/100Mbps Ethernet ports that can be used to connect a range of wired network devices such as IP telephones and networked minibars while simultaneously providing dual-band 802.11ac wireless LAN coverage.
The C110 is powered by an external 12V DC power supply. The C110 can be deployed as a standalone device or centrally managed by SmartZone or ZoneDirector management platforms.
The Ruckus H500 is a converged wired and wireless wall switch featuring Ruckus BeamFlex+ smart antenna technology to deliver high-speed 802.11ac Wi-Fi in an ultra-sleek, low-profile design that can be quickly and discretely installed in a standard wall junction box. Ideal for offering converged services in hotel guest rooms, student residences, and MDUs, the Ruckus H500 provides an easy way to offer multiple connections into a single room without multiple cables. Equipped with four Ethernet ports for in-room access, the ZoneFlex H500 can be used to connect a range of wired network devices such as IPTV set top boxes, IP telephones, or networked minibars. An IEEE 802.3af-compliant Power-over-Ethernet (PoE) port on the H500 allows devices such as IP telephones to be powered directly from the wall switch. The H500 itself may be powered via PoE or DC power adapter.
The ZoneFlex™ H510 is a Wave 2 802.11ac (MU-MIMO-capable) Wi-Fi access point with integrated switch in a wall-plate form factor.
H510 features Ruckus' patented BeamFlex + adaptive antenna technology to deliver high-speed 802.11ac WiFi in a low-profile design that can be discretely installed over a standard electrical junction box. H510 allows a range of wired & wireless services to be delivered in hotel guest rooms, student residences, and multi-dwelling units with just a single cable pull per room and eliminates the need for additional switches and power supplies.
Equipped with four Ethernet ports for in-room access, the ZoneFlex H510 can be used to connect a range of wired network devices such as IPtv set top boxes, IP telephones, or networked minibars while simultaneously providing dual band 802.11ac wireelss LAN coverage. An IEEE 802.3af-compliant Power-over-Ethernet (PoE) port on the H510 allows devices such as IP telephones to be powered directly from the wall switch. The H510 itself may be powered via standard PoE or a DC power adapter. The H510 can be deployed as a standalone device or centrally managed by SmartZone, ZoneDirector, or FlexMaster management platforms.
The Ruckus R300 is an entry-level indoor Access Point offering best in class performance. The R300 features dual 802.11n radios (2.4 and 5 GHz) in a 2x2:2 MIMO configuration, yielding up to 600 Mbps of physical layer throughput. A single Gigabit Ethernet port and can be powered via 802.3af PoE or by a separate
12VDC power accessory. The R300 sports a low-profile, minimalist industrial design and is extremely compact in size, measuring 13 x 13 x 2.8 cm (5.1 x.5.1 x 1.1 inches).
The ZoneFlex R310 is the industry’s lowest cost enterprise class 802.11ac access point. The R310 has dual radios (2.4GHz & 5GHz) which are capable of concurrent operation. It is a 2x2:2 stream access point, offering up to 867Mbps of physical layer throughput in the 802.11 a/n/ac 5GHz range, with an additional 300Mbps physical layer throughput in the 802.11 b/g/n 2.4 GHz range. It has a single Gigabit Ethernet port and can be powered by 802.3af PoE or a 12V DC power supply. The R310 has a compact form factor (13.8cm x 13.5cm x 3.3cm) is extremely helpful in easy installation, and enables the power of 802.11ac literally in the palm of your hand.
It is perfect for low client density deployments such as coffee shops, convenience stores and other brick & mortar establishments, where cutting edge WiFi is necessary, but there is only a lean IT staff to manage the network. The R310 is a perfect entry level enterprise class 802.11ac access point that delivers maximum value at minimal cost.
The ZoneFlex R500 is the industry’s best-performing 2x2 802.11ac indoor WLAN access point, combining Ruckus-patented RF technologies with the new IEEE 802.11ac standard to provide outstanding WiFi performance.
The R500 features dual radios, capable of concurrent operation. It features a 5 GHz 802.11a/n/ac radio in a 2x2:2 spatial stream configuration, capable of physical layer rates of up to 867 Mbps. A 2.4GHz 802.11b/g/n radio in a 2x2:2 spatial stream configuration offers an additional 300 Mbps of physical layer throughput. Ruckus’ ZoneFlex R500 is an ideal access point for medium client density enterprise and hotspot environments including SMBs, schools, hotels, branch offices and retail outlets.
The ZoneFlex R510 brings cutting edge 802.11ac Wave 2 to the mid-tier segment. It improves aggregate network throughput and benefits both Wave 2 & non-Wave 2 clients. It combines Ruckus patented technologies and best-in-class design with the next generation of 802.11ac features to deliver outstanding Wi-Fi performance and reliability. It future proofs the customer for emerging Internet of Things (IoT) technologies.
With throughput capacities of 300Mbps (2.4GHz) and 867 Mbps (5GHz), the ZoneFlex R510 brings cutting edge Wave 2 technology for the mid-tier segment. 802.11ac Multi-User MIMO (MU-MIMO) support allows the R510 to simultaneously transmit to multiple client devices, drastically improving airtime efficiency, overall throughput, and availability.
ZoneFlex R510 is purpose-built for medium density, high performance and interference-laden environments such as schools, universities, small-medium businesses, hotels, MDUs and conference centers.
The ZoneFlex R600 is a 3x3 802.11ac WLAN access point featuring performance-enhancing, Ruckus-patented RF technologies available at a compelling price point. The R600 is ideal for medium- to high-density mobile device wireless networks. It is a power-efficient access point, capable of operating with full functionality on standard (802.3af) PoE. This keeps total cost of ownership of the R600 low by eliminating the need to upgrade to more expensive PoE+ switch infrastructure. The R600 features dual radios, capable of concurrent operation. It features a 5 GHz802.11a/n/ac radio in a 3x3:3 spatial stream configuration, capable of physical layer rates of up to 1300 Mbps. A 2.4 GHz 802.11b/g/n radio in a 3x3:3 spatial stream configuration offers an additional 450 Mbps of physical layer throughput.
The ZoneFlex R610 delivers blazing performance, with data rates up to 1900 Mbps and the density-handling ability to match. Patented BeamFlex+ technology rejects interference and improves signal quality for any device, anywhere. Included MU-MIMO technology maximizes network efficiency, reducing bottlenecks and enhancing user experience.
The R610 is a great fit for deployments in high-density enviornments in which dozens of clients need guaranteed high throughput. K-12 schools offering online digital learning with 30+ kids per classroom and university lecture halls serving concurrent HD video streams to hundreds of student devices are perfect use cases for the r610.
The R610 can be used with any Ruckus control and management platform - appliance, virtual or cloud-managed. That means that as your business needs change, your architecture - and your APs - can change with you.
The Ruckus R700 ensures the most reliable connectivity within challenging and ever-changing RF environments. With BeamFlex+, the Ruckus R700 is capable of delivering 6 dB of signal-to-interference-plus-noise (SINR) improvement and up to 15 dB of interference mitigation over other APs. The R700 simultaneously supports spatial multiplexing and BeamFlex+ to deliver the best price/performance of any three-stream 802.11ac AP.
The ZoneFlex R710 is industry’s highest performance 802.11ac Wave 2 access point. It combines Ruckus patented technologies and best-in-class design with the next generation of 802.11ac features to deliver outstanding Wi-Fi performance and reliability.
With throughput capacities of 800 Mbps (2.4GHz) and 1733 Mbps (5GHz), the ZoneFlex R710 supports the highest available throughput for Wi-Fi clients. 802.11ac Multi-User MIMO (MU-MIMO) support allows the R710 to simultaneously transmit tomultiple client devices, drastically improving airtime efficiency, overall throughput, and availability.
ZoneFlex R710 is purpose-built for high-capacity, high performance and interference-laden environments such as schools, universities, public venues, hotels, and conference centers.
The ZoneFlex R720 is a new dual-band concurrent 4x4 802.11ac Wave 2 Access Point capable of 160 MHz and 80+80 MHz channelization, designed for high density indoor applications. The R720 features one 10/100/1000 Etherenet port, and one 100/1000/2500 Ethernet port that supports 802.3af and 802.3at Power Over Ethernet (PoE), and a USB port for IoT applications.