RUCKUS ICX 7150 Campus Switches

How to generate a SSL/TLS key and connection between SDN and Campus ICX Switches for lab testing?

How do I generate a SSL/TLS key and connection between a Brocade SDN Controller and Campus ICX Switches/MLX Routers for lab testing?

Installing PoE firmware with TFTP - Brocade Campus Network Switches

Installing PoE firmware with TFTP - Brocade Campus Network Switches

Upgrade path for ICX Switches

Upgrade-path-for-ICX-Switches

Why ICX 7150 and ICX 7650 switches do not retain clock date and time upon power cycle?

ICX 7150 and ICX 7650 switches do not retain clock date and time after power outage

Troubleshooting Fiber/ SFP/ SFP+ connection issues on RUCKUS ICX Switches and networks in general

Addressing Fiber and Transceiver Connection Problems, where peer-to-peer fiber connections often fail to establish despite successful cable tests or new cable installations.
Common... (continued)

Factory reset button not working on ICX switches

Factory reset button functionality is not working on ICX switches.

Why ICX7150 switches encounter communication issues with Microsoft NLB?

Customer replaced HP switches with ICX7150 and started experiencing communication issues with Microsoft NLB

Managing User Accounts in Brocade Campus Network Switches

Managing User Accounts in Brocade Campus Network Switches

ICX 7150 License Upgrade

Enabling the license upgrade for purchased license feature for Ruckus ICX 7150 switch

VLAN configuration on Ruckus ICX switches for Ruckus Wireless WLAN's

Adding untagged & tagged vlan on the same switch port on Ruckus ICX switch.

Is there a default password for Ruckus ICX Switches?

Except for Console or Telnet access, prior to FI 08.0.90 admins had to enable authentication and a UserID/PW for SSH and WebUI access.

How to Troubleshoot Ports Flapping on Ruckus ICX Switches

• Review logs for errors or warnings related to the port.
• Inspect cables, transceivers, and check for speed/duplex mismatches.
• Check for STP issues and broadcast storms.
• Test... (continued)

ICX 7150 lose licensing and switch config if ECC error (TSB 2017-268-A)

If an ICX 7150 switch encounters a multi-bit ECC error in the NAND flash memory during boot up, the ICX 7150 switch will lose the license information and configuration files that are... (continued)

PoD licenses for ICX 6610, ICX 6450,ICX 7150, ICX 7250

Article has got brief description about Ports On Demand (PoD) licenses for ICX 6610, ICX 6450,ICX 7150, ICX 7250

The licensing features available on Ruckus Switches

Article has got information about the different types of licensing and their features available on Ruckus Switches

What Ethernet SFP Optics are compatible with Ruckus ZD, SmartZone, ICX switches, and AP products?

Only the 1/10G SFP+ SR Transceiver on Ruckus price sheet has been tested by our QA on Ruckus SZ appliances.
Only the 100Mbe / 1GigE / 10GigE / 40GigE / 100GigE tranceivers on Ruckus... (continued)

Step by Step Guide to Configuring OSPF Authentication on Ruckus ICX Switches

Step by Step Guide to Configuring OSPF Authentication on Ruckus ICX Switches

How to disable auto-upgrade firmware feature on Ruckus one for ICX switches

The customer may not feel comfortable allowing ICX switches to auto-upgrade to Ruckus One's recommended firmware. This KBA is helpful for disabling the auto-upgrade feature for ICX... (continued)

ICX 7000 Switches PoE Version Issue After Upgrade - TSB 2021-001

ICX 7000 series member unit with PoE firmware version showing 00.0.0 after upgrade to RUCKUS ICX FastIron software releases 8.0.95, 8.0.95a, or 8.0.95b (Defect # FI-223444)

FLOW MOD ERROR in ICX Switches

In an untagged Hybrid Port, Flow must be added with the VLAN ID field.

Brocade Campus ICX - DHCP Auto-provisioning

DHCP Auto-provisioning

Brocade Campus ICX - ERSPAN Configuration

ERSPAN ENCAPSULATED REMOTE SWITCHED PORT ANALYZER

Brocade Campus ICX Logging Parameters

How to change the number of syslog entries, enable persistence, log to console and log to a remote syslog server.

Brocade Campus ICX Reload Parameters

How to use the reload after and reload at commands?

Brocade Campus ICX GRE TUNNEL Configuration

Brocade Campus ICX GRE TUNNEL Configuration

How to configure OSPF in Brocade Campus network Switches

How to configure OSPF in Brocade Campus network Switches

ICX switches won't sync with RWG with error "Unable to establish a connection to this device"

Customer have multiple switches added to RWG and would like to enable sync on them so that they could control ICX config using the RWG. When attempting to generate the Config diff for... (continued)

ICX 7450 BiDi Stacking?

Stacking using 40 GbE BiDi transceivers is only supported on the 7750s, not on 7450s.

FAQ on ICX6610 PSU's

FAQ on ICX6610 PSU's

ICX 7150 stack support in 9010 when connected to the cloud.

Article explains about the limitation of stacked ICX 7150 with 9.0.10 on cloud.

Procedure to add stack switches to the RUCKUS One

These steps to be followed to add stack switches in the RUCKUS One

License transfer between switches

Articles describes about what needs to be done in order to transfer the licenses from one switch to the other.

How to configure CLI Profile on R1 when multiple ICX switches are provisioned with static IP addresses

This article describes the steps for provisioning multiple Ruckus ICX switches with static IP address using a CLI configuration profile on R1.

Unable to securely copy SCP Config or supportsave via SCP on ICX 7xxx series switches (TSB-2019-005-A)

Until FI 08.0.90d we are unable to securely copy SCP Config or supportsave via SCP on ICX 7xxxx switches.

ICX - Collecting a SupportSave

ICXCampus - Collecting a SupportSave

Brocade Campus ICX - Configuring FDP AND CDP

Brocade Campus ICX - Configuring FDP AND CDP

Brocade Campus ICX - ENERGY EFFICIENT ETHERNET (EEE)

ENERGY EFFICIENT ETHERNET (EEE) CONFIGURATION

BROCADE CAMPUS ICX LLDP AND LLDP MED DISCOVERY PROTOCOLS

BROCADE CAMPUS ICX LLDP AND LLDP MED DISCOVERY PROTOCOLS

BROCADE CAMPUS ICX VLAN MIRROR AND MONITOR

BROCADE CAMPUS ICX VLAN MIRROR AND MONITOR

ICX 7150 boot error: BUG: soft lockup - CPU#0

How to debug "soft lockup" error

Configuring Link Aggregation between Juniper EX switches and Ruckus APs

The attached guide helps configure link aggregation on Juniper EX switches for 802.11ac wave 2 R710 (and later model) APs.

Increased fan noise concerns in ICX 8200-48ZP2-E and ICX8200-48PF2-E switches

Issues with Pre-standard PoE phones on ICX switches

Use the 'legacy-inline-power' command on ICX switches to be sure of Pre-standard PoE phone compatibility

How many ICX switches can we connect to a SmartZone 5.0 Cluster?

See details in the Release Notes and Getting Started Guide for ICX switch count per SZ type cluster.

How to configure encrypted radius in ICX switches on 08.0.30

Details of command-line parameters for configuring encrypted RADIUS

Required data for PoE troubleshooting on ICX Switches

Required data for PoE troubleshooting on ICX Switches.

Configuring VLANs for APs and SSIDs on ICX Switches

To ensure optimal performance and security on most networks, it's crucial to configure your switches and Access Points (APs) correctly. This article explains the configuration... (continued)

Configuring LACP for R710 on Ruckus ICX 7450

Configuration guide for LACP on Ruckus ICX7450 switch for R710 (ACw2) model APs.

How to configure SSH on Ruckus ICX?

How to configure SSH on ICX switch

PD detection fault on several switches with Aruba AP second port

PD detection fault on several switches with Aruba AP second port

Collecting a Show Tech-Support on ICX Switch

Collecting a Show Tech-Support on ICX Campus Edge Switch.

ICX Campus Switches/FastIron Licensing FAQs posted

We have heard from a number of customers and partners who are experiencing some difficulties with the transition from the legacy Brocade licensing tool (Brocade Software Portal) to the... (continued)

How do I stack two ICX7150 switches?

Hello everyone,I'm a novice at best, really a simple DIY'er. Amazon installed a Ruckus ICX7150 switch in my smart panel and I have an acces point upstairs and another downstairs. Since... (continued)

SmartZone and ICX Switches

I'm getting ready to turn up a new site of 100 H510 Access Points. We are also using ICX 7150 Switches and a RXG Gateway. Does anyone know when I add these Access Points to SmartZone... (continued)

Ruckus ICX 7150 & R510

I just moved into a new home by Lennar and they have 1 ICX 7150 and 2 r510s installed in the house. I have ATT Fiber, ATT provides a modem/router which connects to the ICX 7150 and the... (continued)

ICX 7150 upgrade

Hi,I did understand that there is a two tier approach to upgrade the firmware to the latest UFI code.The recommended SW is:I assume the R means router... (continued)

ICX 7150-48ZP & LRM

I have a number of the 7150-48ZP that we just deployed.  In the past (with another vendor switch) we used LRM SFP+ for connecting wiring closets.  We put in the 7150's a... (continued)

Ruckus ICX 7150-48ZP configuration help

We have a Ruckus ICX 7150-48ZP connected a server (eth 1/1/1), and two Cisco switches A and B (eth 1/1/47 and 1/1/48). We want to configure the Ruckus ICX 7150 switch only to... (continued)

ICX Switches - Integrate with Ruckus Cloud platform?

Can the ICX switches fully integrate with Ruckus Cloud?I have been using the Ruckus cloud platform and wanted to know if the ICX switches could be managed via the cloud portal?I have... (continued)

RUCKUS ICX 7150 24P SWITCH UNSTABLE, SWITCHING ON AND OFF PORTS

Hello guys, First of all, i would appreciate any workaround that anyone could give me. I have a large Switch network for a LAN of a univerisity campus here. This network is mixed... (continued)

ICX 7250 stack switches rebooting

I updated to 8090 UFI on my ICX 7250s in most of the stacks unit 1 stays up but units 2 and 3 show that the have restarted sometime recently. Found this because my AP report... (continued)

Announcement: Ansible Modules for ICX 7000 Model Switches

Greetings,   Ruckus is pleased to provide ICX 7000 model switch support thru Ansible Modules 1.0,now available on the Support Portal at these links for Install/Execute Release... (continued)

ICX 7150 48P - VoIP Phones

Good morning,I have 2 ICx 7150 switches in stack.This is my configCurrent configuration:!ver 08.0.80dT211!stack unit 1  module 1 icx7150-48p-poe-port-management-module  module... (continued)

Layer 3 on 7150 ICX

I need help working with and configuring a Ruckus 7150 ICX switch with Router code and programming it for a layer 3 VLAN to run over a layer 2 VLAN product from an ISP. How do I... (continued)

icx 7150 routing

Needing a little help here please.  We have an environment with no router, but we do have a layer 3 switch.  Please refer to the diagram; we have a server with IP address... (continued)

Can I run 2 R510's off 2 Netgear switches?

I purchased a Lennar home last year and it came with an ICX7150 switch and 2 R510 AP's running Unleashed with mesh configuration. Unfortunately, the house was built upon wireless... (continued)

ICX Switches seem to Loop when setting SZ-Active

Good Afternoon,Has anyone seen an issue where ICX switches running various Firmware will boot loop after being joined to an SZ server?if I unplug the switch from the internet or disable... (continued)

SNMP v3 is not working properly in ICX6450 switches

can you please share the valid configuration of SNMP ver3 in ICX6450 as I configured it but the SNMP agent did identify or get data from my switches

ICX 7150 to Ruckus ZD1200 w/H510 WAP

hello Newbie question.I am trying to connect a ZD1200 via an ICX 7150 switch to H510 APs. vlan 1 is native /Vlan 20 public ssid /Vlan 30 for members / Vlan 40 for media and... (continued)

Unable to boot image to Ruckus ICX 7150

Hi Everyone, Please help me about booting image from USB or TFTP server to Ruckus ICX 7150. This issue arised when I deleted flash of both primary and secondary with reload  while... (continued)

Ruckus 7150 ICX Switch (Lennar) expansion???

I am out of space on my Ruckus ICX 7150 that Lennar installed.  What would I use to expand the number of ports on the switch?  We pre-wired for a lot of ethernet stations and... (continued)

ICX 7150 - dumb switch default password

I've installed a couple of Ruckus ICX 7150 switches with no configuration and I would like to configure them remotely but when I ssh in, it wants a password which I never set.  Suggestions?

ICX 7150 POE Ports in Orange Color

I have ICX7150-48ZP- switches with dual power supply , while i am connecting Cameras to ports , led is orange in color even though i am enabling inline power for ports as wells lldp... (continued)

Questions about ICX 7150 series

I am new to ruckus switches and I have a deployment project in one of our customers datacenters involving  2*ICX7150-24-4X10GR-RMT3  & Nutanix servers  and I have... (continued)

ICX 7150-C12P to r510 AP power issue

I have an ICX 7150-C12P and an r510 AP. After a power outage, the r510 is no longer receiving power via the PoE connection. On the ICX 7150, the ethernet port shows a steady (sometime... (continued)

Layer 3 Switch ICX 7150 : PIM configuration

Hi,I used to configure router PIM on HP switches to route multicast between VLANs, I need to know how can i do that on Ruckus switches?DTV ( channels streamer) on VLAN 120Clients on... (continued)

QoS for VoIP on ICX switches

Hello all,I'm trying to set up some basic QoS functionality on a number of ICX7150 switches.  I have all of my phones in a particular vlan and would like to have the switch mark... (continued)

How to auto-provision Brocade switches by DHCP

Going through the documentation (which is pretty shoddy) I can't seem to figure this out. My best guess, from what I've read, is:Unzip firmware distribution into TFTP server rootAdd... (continued)

Can Ruckus ICX 7150-C12P act as a router and do NAT?

I have a new Ruckus ICX 7150-C12P switch. I’m wondering if I can connect it directly to my ISP’s modem and let it act both as a DHCP server for my devices inside my home and also do the... (continued)

Ruckus ICX 7150 with R510 AP seems unstable

I've had this installed now for about a year without issue, but in the last few months it seems to have destabilized.  The R510 seems to occasionally switch off and reboot, and the... (continued)

Does the ICX 7150 PoE switch support "Passive PoE"

Simple enough... Does the ICS 7150 switches provide PoE to "passive PoE" equipment?  In this specific cast the Ubiquiti UAP-AC-LR?Todd

ICX 7150 Stacking Issues on 8.0.92 with SmartZone

I am attempting to deploy a new environment and I have a fresh ICX 7150 stack (two switches) that are having problems.I don't know if I have a bad unit so I wanted to check with the... (continued)

ICX 7150 48P - Ports turned off

Good morningI have 2 ICX 7150 48P switches in stack.Image version SPS08080dBoot version mnz10114POE version icx7xxx_poe_02.1.0.b002In both switches the 1/1/1 to 1/1/8 ports are turned... (continued)

ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS... (continued)

I have an ICX 7150-C12P and the PoE has switched off.

I have an ICX 7150-C12P. The power was out for several hours and when it came back on the PoE wasn't active. I have done the factory reset about a dozen times and I can't get it back.... (continued)

ICX 7150: Not letting me create a Router-Interface

HELP!!!I've been trying to create a vlan with its own dhcp server, however for some reason my switch is not letting me create a router-interface. I do have the dhcp pool ready for it,... (continued)

ICX 7150-24P corrupted flash?

Switch lost it's configuration after a power outage.During boot i am getting the following messages:Starting kernel ...booting with 4.4 kerneldd cmd: UBIConfig partition mountedUBIFS... (continued)

ICX 7450 stack with ~100 access switches connected and ~250 VLANs

Hello to All,I'm going to design and deploy network infrastructure in huge building based on Brocade ICX switches and other vendor switches (let's say "MS switches"). As I'm new at... (continued)

Help with setting up VLAN trunk ports on ICX switches - is this possible?

I have several Ruckus ICX7150-12P switches, running 08.0.92d (SPR08092d.bin).Our router is a pfSense.I'm trying to setup trunk ports to act as uplink ports between the ICX switches.I'm... (continued)

MPLS - First time I am configuring and MPLS circuit with Ruckus switches. Any tips or suggestions?

First time we are working with an ISP and programming a MPLS circuit or "Vlan product" or "ring" which ever you want to call it. Any suggestions or help programming both the switch and the core? 

Ruckus ICX 7750 IPV6 hardware support forwarding

Hello dears,The ICX 7750 switches supports IPv6 in hardware, in order to provide wire-rate forwarding for IPv6 packets?Thank you!

Ruckus AP with multi SSID into ICX Switch

Longtime user of Ruckus AP's, but new to the ICX switches.  I've been using the ICX Switches in test-bench scenarios to see how I like them before deploying them wide spread. ... (continued)

What takes priority Ruckus ICX 7150-24 Switch OR ZD 1200 in allocating the Switch's power budget?

New to ZDs and PoE.  Have both of these items on order and just selecting APs to complete my network upgrade project.  I'm just wondering whether the ZD will somehow control... (continued)

ICX 7150-24-4X10GR specification

Dear support,Could you help to confirm that ICX7150-24-4X10GR can meet the requirement as below. Thanks1. Shall provide not more than 200ms stack convergence2. Shall provide link... (continued)

How can I upgrade ICX 7150 by Uboot?

failed to connect ICX 7150 to SZ

Hi,i have installed an ICX7150-C12-2X1G POE 12-port - Version:10.1.15T225and i am trying to connect it to my Smartzone vSZ-H - 5.1.1.0.598i have followed the guide and... (continued)

ICX 7150 -> fanless or no fanless ?

Hello,i installed an ICX 7150 48P, and soon as he booted, there is a "panic fan noise, and never stopped.sh ver -> 08.07.70bT211i only have the choice to use the "chassis fanless... (continued)

Switches using Router code vs Switch code and decision making

Hi all,When an ICX switch is on router code, is every packet a forwarding decision even if the ICX device is on a switched circuit on layer 2? If the ICX switch is not performing the... (continued)

Does anyone know if the TOR (7850) Ruckus switches are going ot support DCBX?

7850 DCBX

Lennar house with Ruckus r510 and ICX 7150 C12P not connected at 1000-Full

Hi. I bought a Lennar home and it came pre-installed with Ruckus r510 and ICX 7150 C12P. I'm getting around 100 Mbps from speed tests while on the r510. However, on my Asus, I'm pulling... (continued)

How to set static IP for ICX 7150 C-12P switch through web interface

Hi there.  I went through the steps in the quick set up guide to add a password and enable the web interface using Putty and telnet as I do not possess the necessary console... (continued)

R510 AP and ICX 7150 - APs shutdown and do not power back on

Here is my setup:Comporium Zipstream Gigabit fiber main box gets Ethernet from junction box in garage.The comporium box hands out dhcp addresses and has two built in wifi (2 and 5 GHz)... (continued)