Ruckus IoT Modules are Radio or Radio-and-Sensor devices that connect to a Ruckus IoT-Ready AP to enable endpoint connectivity based on standards such as Bluetooth Low-Energy (BLE), ZigBee and LoRa.
Review all Ruckus IoT product offerings and descriptions on our corporate page Here.
This Bulletin describes the changes available on the Ruckus standalone AP Image 114.0.0.0.1294, which was created because of California Senate Bill 327 (CA SB-327) which goes into... (continued)
After upgrading to IOT 1.5 Release from a previous version or installing a fresh image of IOT 1.5, APs can stay in unregistered state if IOT controller does not have sufficient licenses installed.
This article explores the compatibility of configuration backups across various SZ models. We provide a comprehensive matrix to illustrate which models support configuration backup from other models.
Using the same cluster name for two different SZ models in the same network is not allowed. This will cause the existing cluster to display the error: “Unable to retrieve the cluster... (continued)
This document outlines the procedure for migrating an existing RUCKUS IoT Controller license to RUCKUS IoT Controller 2.0.0.0
RUCKUS IoT Controller 2.0.0.0 is a fresh install. There... (continued)
Why is my Secondary image at the Standby management module not synchronizing and the router is receiving error when uploading from Basic L3 image to the full routing code?
Explains a scenario where Innr-IoT bulbs were getting randomly disconnected from the IOT gateway and would not connect back unless IoT Gateway is rebooted.
R610 AP model or 802.11ac Wave 2 AP models reported Continuous Reboot issues after updating them to 6.1.2 Version on RUCKUS Smart Zone. This article explains the steps to identify the... (continued)
Since there are two dedicated push down buttons on the SmartZone hardware models, it is slightly confusing to find the right button to factory reset the device.
Our company has deployed Ruckus r710's throughout the office. We also happen to develop a realtime situational awareness platform. We are looking to track BLE tags around the office.... (continued)
Our company is looking at implementing/updating our R710s that are running in unleashed to SmartZone to support the IoT modules and gateway software. Besides the plugin modules and... (continued)
Hi,I recently obtained a couple of Ruckus AP and a ZD1200 for my home network.Now
I am looking into SmartHome and wondered whether there is a way to
utilize my Ruckus deployment... (continued)
I tried to enable POE on ICX 7450-24P, but it doesn't show any output.Core#show po poe ... (continued)
Greetings, Ruckus is pleased to provide ICX 7000 model switch support thru Ansible Modules 1.0,now available on the Support Portal at these links for Install/Execute Release... (continued)
i am currently working on a project that involves pairing hue motion sensors,lights,smartplugs and ledstrips to the ruckus iot controller, but i have been stuck on how to make the light... (continued)
Our Developersand QA teams have completed final testing and have approved a new Ruckus
IoT 1.5 (GA) release. Documentation and firmware have... (continued)
I have an ICX-7450 48-Port PoE switch with the ICX7400-SERVICE-MOD IPSec hardware module installed and firmware upgraded to the 08.0.80 release. Following the IPSec section of the... (continued)
Upon boot-up (cold or reload) the switch is failing to initialize the PoE module. Is there anything I can try to resolve this?ICX6610-48P Router>PoE Info: PoE module 1 of Unit... (continued)
I have a 2 member 7450 stack and I need to install an ICX7400-4X10GF module into each unit in the stack. I know each switch stack unit needs to be powered off to insert the... (continued)
I recently got a new apartment and my room had a ruckus device pre installed, but I have no idea what model or if I can even use it. The device has 4 ethernet labeled Lan 1-3 and then a... (continued)
Hello,Want to somehow make icx module work from ansible, but running into a problem.I have a simple playbook just for testing (show ver) but it gives me an error:---- name: show... (continued)
We are running a new deployed network consisting of ICX-7150-48 and using fiber uplinks. Currently the modules we have purchased appear to be compatible with the 7150s based on... (continued)
So has anyone had any luck connecting a Phillips Hue Bridge to the IoT module? Does it require any specific Plugin or should it connect without any plugins?
This looks like Ruckus, but i can't figure out which model this is. There is a SKU on it, it's probably organization specific, google returns nothing on it.
So I understand how the Option 43 works well for the VSZ and ZD. However for the IoT controller documentation seems to be a bit confusing. It says that the IoT controller... (continued)
Hello, The most recent Ruckus IOT (RiOT) v1.5 controller firmware, requires 3 distinct licenses: RTU, Instance, and AP licenses.Not having the licenses in place can result... (continued)
in our company we use ruckhus 7372 soft version 100.0.0.0.128. we've two this one on different floors. we use two ssid . problem is that we losing connection several time duaring the... (continued)
Hello a question that I hope you can solve, with the Ruckus brand team I can achieve the following, I need 500 access points for p-m-p links with a transfer capacity of 200 mbps. 2x2... (continued)
Can the Ruckus Zoneflex 7962 AP operate in Standalone mode, or does it require a controller, like a WLC? I found a refurb at a great price, since I mainly wanted to... (continued)
HI we configure Syslog server for download logs but we need first login MAC id details instead of all entired logs. Please find the snapshot & suggest which we would select option for... (continued)
I have to put 5 AP in a build where i cannot use a cable, so i want access point that communicate in wi fi with mesh for example. Ruckus model for this purpose?
good afternoon, I have a problem, I have 2 ruckus model R600, and I'm implementing VLANS, when I pass the cable VLAN 10,20 and 30, users of Wi-Fi 20 and 30 are connected and have Ips,... (continued)
Hi everybody,This may seem like a silly question, but I would just like confirmation of my assumption.We have our production vSZ-H still running on 3.6.x.x. We are looking to upgrade to... (continued)
Hello everyone ,
I want to connect 3 School buildings by using wireless bridge (7731 OR P300) the distance between one and another about 100m ,also I want to use APs in the Schools'... (continued)
Does the R310 unleashed now support mesh networking? I saw a post here from 4 years ago saying no, but I saw the option in the unleashed setup so I’m a bit confused. I don’t want to... (continued)
We have an ICX7750 with 48 port 10G module. All clients connect at 10G no problem.The same clients - Mac High Sierra & Windows 10 - when connected to our ICX7450 with ICX7400... (continued)
I've been testing unleashed on different model ap's for sometime now.. Have also deployed a cluster with R500 at a client site..Today i tried R510 with unleashed firmware.. It proved to... (continued)
hi there,
i can't find this most needed feature for my usage (multicast video stream), my APs seems to be limited to approximately 6-Mbits using multicast (5ghz/WPA-auto) and i need... (continued)
I am unable to POE any recent model ruckus APs with a PowerDsine 9524 (this is a newer model midspan). They will power up with a PowerDsine 9024. The 9524 has no issue powering other... (continued)
Hi Friends,Please let me know below. Ruckus Controller model and Licenses required for managing the APs aroun 100 numbers ?Is the unleashed APs cluster has limitation... (continued)
ZoneDirector ZD1106 Version 9.6.1.0 build 15 >>>>>>
Model[zf7372] (Version 9.5.0.0.156) is not supported; connection request from AP[2c:e6:cc:30:d2:80] refused
Hey everyone,I purchased a ZD1200 controller to manage 3 R510 APs and I keep getting this message. Support mentioned to reupload same firmware file to the controller (currently 9.9).... (continued)
Hi, I have a ZoneDirector 1100 (Version soft 9.7.1.0 build 32) and tree 7341 AP (version soft
9.7.1.0.3), and i want add a new AP R 700 (version soft
9.8.3.0.14),... (continued)
VRoIT Firmware is not available from the support site, tried to search if there is announcement on portal for its disappearance but didn't find any. I am in middle of deployment and not... (continued)
in my network on access point is getting disconnected automatically in the network and i have to connect unplug and plug back the cable to make it get back connected what can be the... (continued)
Hello all, I'm not very familiar with Ruckus products. I'm hoping someone can point in the right direction with the products I might need for this...- Customer already has an... (continued)
I have a ZD1100 that I need to convert to using VLANs. That's easy enough to tag each ssid to the correct VLAN. All the traffic comes out of the ZD1100 on one connection so I need a way... (continued)
Dears,Regarding powering Ruckus T750, could any one explain to me the difference between,Poe 802.3bt class 7 and AC Power ?what is SFP+ and Ethernet Backhual ?Image... (continued)
After testing the 200.5 version of the defective R500 R600, will lead to a series of models, wireless LAN appears high delay, packet loss and other cases, only by reducing version to... (continued)
Hi,
I am Ben from Kenya. My company will soon be required to deploy and support RUCKUS equipment for our major Partner who is rolling out WiFi Solutions based on the RUCKUS platform.... (continued)
I am having two Ruckus R510 access points.My internet service provider is offering 900 mbps speed but WiFi speeds are only 400 Mbps max. I tried changing channels from auto to Speicific... (continued)