Virtual SmartZone-Dataplane (vSZ-D) - Federal

vzd-h with PEAP

How to get work Radius connection with PEAP and EAP-MSCHAP v2 on vZD-H 3.4.1?When i want to testit then olny ways to do that is PAP or CHAP and it fails.On... (continued)

Virtual smart zone boots

We had a power failure and after that the Virtual Smart Zone boots, but none of the services start so no access to the web interface and the whole thing is off basically

Virtual SmartZone with R610 AP

I have setup my Virtual Smart Zone controller with version 3.6.1.0.227.I have a ZoneFlexR610 AP but i don't know how to connect it to my controller. Can you explain me how to do... (continued)

Virtual vsz agent.

Is virtual vsz have also somekind agent like system so that cluster is in my datacenter and in customer site i have agent that that collects information and do other tasks?

Virtual SmartZone on a different site

Hi, I need to manage many AP on many physical site. Can I setup my smartzone in my primary site and manualy set the controller address on my AP to point to the wan address of my primary... (continued)

Virtual SmartZone Sending Report

Hi Guys,I have a virtual Smartzone up and running and wanted to know if it is possible to send a daily or a scheduled report to a list of emails. I can generate these reports and I have... (continued)

AD authentication on virtual smartzone

Hello,I want to create a WLAN (on virtual Smartzone high scale) with AD authntication.Unfortunately, when I create the Authentication profile, i get an error messageIf I select radius,... (continued)

Test Virtual Smart Zone IP settings

Hello,I have configured my vsz with the settings below. Is there any way of know if all configurations (Cluster and Control, Management is OK) are OK? For now, i know management is OK... (continued)

ZoneDirector to Virtual SmartZone

I've got 3 existing sites, each with their own ZD1200 (running 10.1 firmware). We're planning to move to Virtual Smart Zone hosted at one location. I see that there is an option to... (continued)

Virtual SmartZone Firmware Zones

Hi!We have a vSZ-E running firmware 3.6.2.0.222 and managing multiples R610, R310, R300 and R600 Access Points.Our idea is upgrade the controller to firmware 5.1 and create a zone... (continued)

Virtual SmartZone Firmware Zones

vSZ-H running firmware 3.6.2.0.222 and have near 2000 APs.About 700 APs are R300, ZF7782,ZF7982... Is it possible that we have one vSZ on the old 3.6.2 version (with older APs models)... (continued)

Downgrading firmware virtual SmartZone

Hello, I have just deployed a new VM of virtual Smartzone using the ova with firmware 5.1.1.0.598.However now I realise I also need a zone supporting firmware 3.6.2 due to some old AP... (continued)

Creating HA for Virtual SmartZone-H

Hi,I am back :-) I have just deployed two vSZ version 5.1.1.* on two Proxmox servers. And now wanted to make an High Availability between them. However, I could not find any... (continued)

LDAP Auth for SSID Virtual Smart Zone

Is it possible to setup LDAP Authentication on a Wireless SSID? If so How?We have an LDAP AAA Server setup which is used by our Web Authentication Portal but when setting up another... (continued)

VM tools Virtualsmartzone

Hi ! - Is it possible to install VMware tools on the Virtual Smartzone Gateway ? If yes, is there any  documentation or i have to refer to the CentOS documentation ?- Does Ruckus... (continued)

could not set up virtual smart zone on Virtual Box by importing ova file

hello everybody,first of all, I show you what I did setup.ISO file: vscg-5.1.0.0.496.ovaVM: Virtual Box version 5.2.28 r130011 (Qt5.6.3)RAM: 5G CPU: 2 cores.Network Interface: keep only... (continued)

Virtual Data Planes Unable Join to Virtual Smartzone (H)

Hi Everyone,I have an issue connecttion between vdp and vsz, vdp unbale join to vsz. I have tried to set factory both and reconfigure it. The result still the same.

Virtual SmartZone - Essentials (vSCG) Web Authentication Certificate https portal

HelloWe are in the middle of a zone director zd1112 to the vSCG migration process.I’ve run a configuration backup and restored it on the first server -  vSCG version... (continued)

Virtual Smartzone with 1 network interface

Hi,I have set up 2 virtual smartzone with 1 network interface each. Is it possible to make a cluster with only 1 network interface?Thank you for your help !

Virtual SmartZone High Scale: 3.4.2.0.152 - Where is map view?.

Google Maps view is clearly visible but I would like to upload my only floor plans and add the APs to the correct location.  I am new to Ruckus and assumed that this is an option.

client rate limit on Virtual SmartZone

Hello, i need to define client rate limit on my Virtual SmartZone - High Scale for the APs. can't fined where to set it up. can someone explain please

Virtual Smart Zone -High Several AP firmware

Hi,In the platform Ruckus VSZ-H there is the possibility to load several firmware to support old AP(Example: ZF7343). In the literature says that each zone can have a firmware. Any... (continued)

Migration from Zonedirector 1200 to Virtual SmartZone

I currently have a Zonedirector 1200 with 75 AP licenses.  May I know if the AP licenses can be migrated to Virtual SmartZone ?  What is the steps to do the migration ?  

Virtual Smartzone - AAA server authentication

Hello,We would like to authenticate our users using a RADIUS-server, included in the NPS-server from Microsoft Server 2012 R2. They have to login using the 'Web Authentication'... (continued)

Batch Provisioning for APs with Virtual SmartZone

Is there any more detailed documentation available for batch provisioning of AP's with the Virtual SmartZone?   The (very brief) mention of the feature in the administration manual... (continued)

Virtual SmartZone R610 client disconnected

My VSZ version is 3.6.All my R610 Aps under VSZ , the pad client disconnected and join repeatedly.
My WiFi phone connected to the wlan and after serveral minutes, they disconnected and... (continued)

Virtual SmartZone html login form example

Does someone has a captive portal login form with POST action and required hidden fields example to use with VirtualSmartZone?Thanks!

Anyone here is using Virtual Smart Zone Dataplane ?

We are using vSZ-D and tunneling all traffic from AP to Dataplane and we are facing some basic issue like after a while the tunnels crash and need a reboot of the Dataplane to come back... (continued)

Ruckus Virtual SmartZone on Nutanix AHV

Is Virtual SmartZone supported to run on Nutanix AHV clusters?  Can't seem to find any information about it and haven't heard of anyone who's tried it.  Since AHV is based on... (continued)

Ruckus Virtual SmartZone Essentials version 3.5.1.0.862

Hello, My company have Ruckus Virtual SmartZone Essentials version: 3.5.1.0.862.I need MIB of this product to add it to my supervision but I can't find this MIB Can you help... (continued)

virtual smartzone user defined interface

hello I replace a smartzone 100 with a virtual smartzone, I need the option user defined interfaces (udi) that does not exist, how can I work around this problemvsg 3.2.1.0.253

Monitoring SNMP traps on Virtual SmartZone

There's a couple SNMP traps we want to monitor, but these MiB's are not included in the MiB's download from the Support page. Does anyone have a way to monitor these event traps on the... (continued)

Virtual Smartzone - High Scale = Event Threshold all 90%

Hi Guys,I need your suggestion or recommendation to decrease the threshold value of the vSZ. There were times that it causes our vSZ to be unusable or we cant logon to the vSZ it says... (continued)

Virtual smart zone - AP not advertising wireless

AP t310d no light on Air, 2.4 G and 5 G.the problem started after performing factory reset on the AP. The AP is on the proper WLAN group and the WLAN service is enabled for 2.4 Ghz and... (continued)

Virtual Smartzone 802.11n and 802.11ac compatibility.

Hello, we are currently running Virtual Smartzone with firmware 3.6.2.0.222.We are finding that older 802.11n devices cannot connect. Is this a known issue and is there a more recent... (continued)

Virtual Smartzone upgrade AP firmware problem

Hello, I have uploaded new AP firmware to my Smartzone. I am now going to the zone and selecting 'Change AP firmware'. However I only receive this blank popup page with no option to... (continued)

Virtual SmartZone (vSZ-H): Limit Guest wifi

Hi there,Thanks for reading.I'm seeing my remote sites are oversubscribing our ISP circuit speed.  I need to ensure that Android/iPhone/Guest traffic are throttled so the real work can proceed.

virtualizing a zonedirector

Hi,I would like to install two redundant ZoneDirector 1200. My question is :What specs (RAM, space, CPU etc...) should i give to my virtual machines ?And also, is there a guide that... (continued)

HELP!! I need root password to install VM Tools in virtual Smartzone

We newly installed or transfer our Virtual Smartzone to a new Machine blade server. Our new server requires us to install VM tools to our VM’s to better optimize the performanceAnyone... (continued)

I have a ruckus WiFi network that has recently been moved into Ruckus Cloud Virtual SmartZone 3.6.2.0.222 how long will ZF7982s be supported

I have a ruckus WiFi network that has recently been moved into Ruckus Cloud Virtual SmartZone 3.6.2.0.222 how long will ZF7982s be supported? as out of our 34 APs 29 of them are... (continued)

How to integrate Virtual SmartZone Controller with Aradial Enforcer

Model: Virtual SmartZone - High Scale, AP firmware : 3.2.1.0.642
I need to configure this Ruckus Controller with Aradial Billing Software. So that our hotspot users can authenticate... (continued)

Current Migration Process from ZD 3000 to virtual Smartzone Essentials

I have decided to move to a virtual SmartZone controller because Ruckus informed me that the new SmartZones would allow autonomous WLANs to continue running on meshed APs if the... (continued)

Virtual Smart Zone+Captive Portal(apache+php)+ Client unauthorized

Hi!We are developing a captive with php and apache as a web server, which sends a form mendiante the following parameters:<form method=POST... (continued)

Ruckus Virtual Smart Zone client_mac and uip encryption

Hello,I configured my Virtual Smart Zone controller with a external captive portal.When the user tries to login, he is redirected to... (continued)

Can't Back up System Configure on Virtual Smart Zone!

Dear all,I'm using Virtual Smart Zone(VSZ), controller version: 3.4.1.0.208 and AP Firmware version:  3.4.1.0.329!Now I wanna backup configure, but I can't back up system... (continued)

Virtual SmartZone API : How should serviceTicket be used?

I'm currently building a service to communicate with a Virtual SmartZone. On startup, the service calls the v7_0/serviceTicket route and receives a service ticket back, which is used as... (continued)

Can't leave blank DNS entries on Virtual SmartZone High Scale 6_1 API?

I'm doing a WiFi setup where everything's handled, the APs are set to IPv4 Static, and the primary/secondary DNS fields are blank.When I configure them this way on the web, the blank... (continued)

HtH: Upgrading a Virtual SmartZone Cluster - New video, KB articles, and tech doc

Greetings,   Adding to our SmartZone material on the How-to-Hub, please find details on our newestoffering:
Subject:  Upgrading a Virtual SmartZone Cluster– new video,... (continued)

Troubleshoot Ruckus AP not connecting to Virtual SmartZone cloud controller

I have one VSZ-H + AP R310, but I can not add this AP in to VSZ, everybody maybe help me?

Virtual SmartZone to filter AD by a specific OU - How can I do that?

Right now I have made a AAA Authentication server that is AD and it works but I only want certain OU to be authenticated how can I go about doing that?

New How-To Hub Content Available - Configuring a Virtual SmartZone (vSZ) Cluster

We have a new
self-help topic that is available on the How-To Hub. 

Configuring
a Virtual SmartZone (vSZ) ClusterOur goal is to
provide detailed information on... (continued)